Welcome to the Solid State Audio website

Your n°1 source for high-end audio equipment, cables and loudspeaker systems.

Soundright SF-CU Interconnect Cable

The patent structure "Coaxial frequency-division transmission" was put to use in this cable; ordinary audio cables usually adopt symmetry or coaxial structure inside. But as the development of audio cable technology research, how to reduce the Skin-effect, signal loss and phase distortion attract more and more attention.

Resorting to the research and experimentation on audio cables for a long time, Soundright adopt a new patented cable structure for signal transmittal, "Coaxial frequency-division transmission", in order to solve the said problem. The aim for this structure is making the signals in different frequency stage to be transmitted in different material inside the whole cable, in order to make the signal transmittal smoother and more expediter, interferences and signal losing are also decreased as well.

Thanks to this patent technology, the signal transmittal in such structure is smoother and more expediter, interferences and signal losing are also decreased. The key point of this patent technology is the accurate calculation and arrangement of the conductance inside, which is of the different material and in different shapes. The key point of this patent technology is accurately calculate the Physics Geometrical Parameters of different conductance with different shape (such as copper, silvery and gold), and arrange them inside of the cable suitably, in order to actualize the signal in different frequency will be transmitted separately.

The structure is just shown as sketch map. The cables with such structure are goods at the analysis ability and balance in the whole frequency and could effectively decrease the signal loss.

The negative polarity, also as the external conductance of the coaxial structure, is consisted of 48 wires of lacquered OFC, which were twisted together as a braiding net. It could effectively avoid the electromagnetic disturbance and ensure the high purity of the signal. The positive polarity, also as the internal conductance of the coaxial structure, is consisted of two parts: the 0.1X3.3 mm, 5N OFC foil, and several lacquered twisted multi-strands single crystal copper wires. Compared with the columniform conductance, the flat conductance has much bigger surface area on the premise that both of them have the same cross section. In other words, the flat silver foil could reduce the ¡°Skin Effect¡± greatly especially on the high. Therefore, the high frequency signal, which is transmitted through this flat foil could remain the most details. Meanwhile, the middle frequency signal is delivered by the lacquered twisted OFC wires. In the end, the low frequency signals are transmitted averagely through all the conductance. Herein, the different signals in different frequencies are transmitted in different paths, the internal disturbance is reduced greatly, besides, because the loss on the high is also extremely decreased, the entire sound is of more transparent high, more mellow middle and more powerful low. Especially during the huge dynamics, the sound is not turbid.

It adopts the 24K gilt snap-on coupling RCA connectors, which could reduce the contact loss to the minimum and ensure the reliable use.

1.0 meter pair incl. high quality RCA type connectors

12 months limited SSA warranty

Price incl. VAT (excl. shipping costs) € 110,-

......................................................

Soundright SF-Silver Interconnect Cable

The patent structure "Coaxial frequency-division transmission" was put to use in this cable; ordinary audio cables usually adopt symmetry or coaxial structure inside. But as the development of audio cable technology research, how to reduce the Skin-effect, signal loss and phase distortion attract more and more attention.

Resorting to the research and experimentation on audio cables for a long time, Soundright adopt a new patented cable structure for signal transmittal, "Coaxial frequency-division transmission", in order to solve the said problem. The aim for this structure is making the signals in different frequency stage to be transmitted in different material inside the whole cable, in order to make the signal transmittal smoother and more expediter, interferences and signal losing are also decreased as well.

Thanks to this patent technology, the signal transmittal in such structure is smoother and more expediter, interferences and signal losing are also decreased. The key point of this patent technology is the accurate calculation and arrangement of the conductance inside, which is of the different material and in different shapes. The key point of this patent technology is accurately calculate the Physics Geometrical Parameters of different conductance with different shape (such as copper, silvery and gold), and arrange them inside of the cable suitably, in order to actualize the signal in different frequency will be transmitted separately.

The structure is just shown as sketch map. The cables with such structure are goods at the analysis ability and balance in the whole frequency and could effectively decrease the signal loss.

The negative polarity, also as the external conductance of the coaxial structure, is consisted of 48 wires of lacquered OFC, which were twisted together as a braiding net. It could effectively avoid the electromagnetic disturbance and ensure the high purity of the signal. The positive polarity, also as the internal conductance of the coaxial structure, is consisted of two parts: the 0.1X3.3 mm, 4N silver alloy foil, and several lacquered twisted multi-strands single crystal copper wires. Compared with the columniform conductance, the flat conductance has much bigger surface area on the premise that both of them have the same cross section. In other words, the flat silver foil could reduce the "Skin Effect" greatly especially on the high. Therefore, the high frequency signal, which is transmitted through this flat foil could remain the most details. Meanwhile, the middle frequency signal is delivered by the lacquered twisted OFC wires. In the end, the low frequency signals are transmitted averagely through all the conductance. Herein, the different signals in different frequencies are transmitted in different paths, the internal disturbance is reduced greatly, besides, because the loss on the high is also extremely decreased, the entire sound is of more transparent high, more mellow middle and more powerful low. Especially during the huge dynamics, the sound is not turbid.

It adopts the 24K gilt snap-on coupling RCA connectors, which could reduce the contact loss to the minimum and ensure the reliable use.

1.0 meter pair incl. high quality RCA type connectors

12 months limited SSA warranty

Price incl. VAT (excl. shipping costs) € 175,-

......................................................

Soundright LN-1 Loudspeaker Cable

The basic material for these cables is imported 5N OFC twisted wire, and within each group, there is one piece of 0.4mm core wire inside. There are 24K gold-plated spade and banana optional for users.

The Soundright LN-1 is an entry level loudspeaker cable, whose tonal color is neuteral and very clean sounding.

Terminated with 24K gold plated spades and bananas.

2.5 meter pair incl. high quality spade and banana type connectors

12 months limited SSA warranty

Price incl. VAT (excl. shipping costs) € 100,-

......................................................

Soundright LF-CU Loudspeaker Cable

The patent structure "Coaxial frequency-division transmission" was put to use in this cable; ordinary audio cables usually adopt symmetry or coaxial structure inside. But as the development of audio cable technology research, how to reduce the Skin-effect, signal loss and phase distortion attract more and more attention.

Resorting to the research and experimentation on audio cables for a long time, Soundright adopt a new patented cable structure for signal transmittal, "Coaxial frequency-division transmission", in order to solve the said problem. The aim for this structure is making the signals in different frequency stage to be transmitted in different material inside the whole cable, in order to make the signal transmittal smoother and more expediter, interferences and signal losing are also decreased as well.

Thanks to this patent technology, the signal transmittal in such structure is smoother and more expediter, interferences and signal losing are also decreased. The key point of this patent technology is the accurate calculation and arrangement of the conductance inside, which is of the different material and in different shapes. The key point of this patent technology is accurately calculate the Physics Geometrical Parameters of different conductance with different shape (such as copper, silvery and gold), and arrange them inside of the cable suitably, in order to actualize the signal in different frequency will be transmitted separately.

The structure is just shown as sketch map. The cables with such structure are goods at the analysis ability and balance in the whole frequency and could effectively decrease the signal loss.

The negative polarity, also as the external conductance of the coaxial structure, is consisted of pieces of multi-strands OFC by white PVC materials and twisted together as a braiding net. It could effectively avoid the electromagnetic interferences and ensure the high purity of the signal. The positive polarity, also as the internal conductance of the coaxial structure, is consisted of three parts: the 0.1X3.3 mm, 5N OFC foil, which is covered by PIEE materials, several twisted and lacquered multi-strands single crystal copper wires, and a stranded OFC wire with 61 cores. Compared with the columniform conductance, the flat conductance has much bigger surface area on the premise that both of them have the same cross section. In other words, the flat gold and silver foil could reduce the "Skin Effect" greatly especially on the high. Therefore, the high frequency signal is transmitted through this OFC foil. Meanwhile, the middle frequency signal is delivered by the lacquered OFC wires. In the end, because the surface area of the stranded OFC copper is bigger but the current impedance is lower, the low frequency signal is transmitted through it. Herein, the different signals of different frequencies are transmitted in different paths, the internal disturbance is reduced greatly, besides, because the loss on the high is also decreased, the entire sound is of more transparent high, more mellow middle and more powerful low. Especially during the huge dynamics, the sound is not turbid.

Terminated with 24K gold plated spades and bananas.

2.5 meter pair incl. high quality spade and banana type connectors

12 months limited SSA warranty

Price incl. VAT (excl. shipping costs) € 225,-

......................................................

Soundright LF-Silver Loudspeaker Cable

The patent structure "Coaxial frequency-division transmission" was put to use in this cable; ordinary audio cables usually adopt symmetry or coaxial structure inside. But as the development of audio cable technology research, how to reduce the Skin-effect, signal loss and phase distortion attract more and more attention.

Resorting to the research and experimentation on audio cables for a long time, Soundright adopt a new patented cable structure for signal transmittal, "Coaxial frequency-division transmission", in order to solve the said problem. The aim for this structure is making the signals in different frequency stage to be transmitted in different material inside the whole cable, in order to make the signal transmittal smoother and more expediter, interferences and signal losing are also decreased as well.

Thanks to this patent technology, the signal transmittal in such structure is smoother and more expediter, interferences and signal losing are also decreased. The key point of this patent technology is the accurate calculation and arrangement of the conductance inside, which is of the different material and in different shapes. The key point of this patent technology is accurately calculate the Physics Geometrical Parameters of different conductance with different shape (such as copper, silvery and gold), and arrange them inside of the cable suitably, in order to actualize the signal in different frequency will be transmitted separately.

The structure is just shown as sketch map. The cables with such structure are goods at the analysis ability and balance in the whole frequency and could effectively decrease the signal loss.

The negative polarity, also as the external conductance of the coaxial structure, is consisted of pieces of multi-strands OFC by white PVC materials and twisted together as a braiding net. It could effectively avoid the electromagnetic interferences and ensure the high purity of the signal. The positive polarity, also as the internal conductance of the coaxial structure, is consisted of three parts: the 0.1X3.3 mm, 5N silver foil, which is covered by PIEE materials, several twisted and lacquered multi-strands single crystal silver wires, and a stranded silver wire with 61 cores. Compared with the columniform conductance, the flat conductance has much bigger surface area on the premise that both of them have the same cross section. In other words, the flat gold and silver foil could reduce the "Skin Effect" greatly especially on the high. Therefore, the high frequency signal is transmitted through this silver foil. Meanwhile, the middle frequency signal is delivered by the lacquered silver wires. In the end, because the surface area of the stranded silver is bigger but the current impedance is lower, the low frequency signal is transmitted through it. Herein, the different signals of different frequencies are transmitted in different paths, the internal disturbance is reduced greatly, besides, because the loss on the high is also decreased, the entire sound is of more transparent high, more mellow middle and more powerful low. Especially during the huge dynamics, the sound is not turbid.

Terminated with 24K gold plated spades and bananas.

2.5 meter pair incl. high quality spade and banana type connectors

12 months limited SSA warranty

Price incl. VAT (excl. shipping costs) € 300,-

......................................................