Your cart is empty

RP-1 Black

  • Model: Lyngdorf RP-1 Black
  • Shipping Weight: 6.5kg

The RP-1 is a standalone room correction processor that can be inserted in any conventional pre-/power amplifier set up. This is the simplest way of removing room-generated anomalies and the fastest way to improve the sonic performance of analogue audio system.

The effect of the RP-1 "Black Box" is magical - however, there is nothing mysterious about why it is so efficient. The "Black Box" simply introduces the world patented RoomPerfect room correction technology to improve the sound in analogue audio systems. In essence, the "Black Box" will improve sound reproduction in any audio system, from basic to very high-end set-ups.

To ensure maximum compatibility and easy connection the RP-1 offers both single ended and balanced inputs/outputs. So, select single ended or balanced in the RP-1 menu and connect it between your pre- and power amplifier - or via a tape loop on your integrated amplifier and you are done!

Even though RoomPerfect is the most sophisticated room correction system on the market it is very simple to use. You donīt need to know anything about acoustics or computers to get the full benefit of RoomPerfect. The menu will guide you through the calibration and everything needed; microphone, stand and cable come included with the RP-1. So, you will be easily up and running in less than - hour!
And bear in mind that we are not just talking "tweaking" here. This device removes the single, most influential obstacle in the quest to achieve the best possible music re-play the room itself.

Input sensitivity 4.4V (2.2V with high sens.)

Frequency response 20 - 20KHZ +/-0.1dB

THD+N + N, A-wgt
Analog to analog 103dB Neutral voicing
Ref 4.4V
S/N ratio
Analog to analog 113dB Neutral voicing
Ref 4.4V
Dynamic range
Analog to analog 113dB Neutral voicing
Ref 4.4V
Channel separation 114dB AC Sweep from 125 - 16KHz
Mains voltage range 100-240V AC, 50-60Hz
Power consumption 4W Standby mode
Power consumption 23W Operate mode
Width 450mm / 17.72in
Depth 345mm / 13.58in
Height 100mm / 3.94in Including feet


Add to Cart: