Your cart is empty

R30

  • Model: Dussun R30
  • Shipping Weight: 34kg

Dussun R30 Hyper Class A Reference Integrated Amplifier

R30 was an integrated amplifier developed and handcrafted elaborately to re-render full music sprit and connotation,whose design reference benchmark is state of the art counterpart hi-end integrated amplifiers’ performance, tone, function, construction and fabrication. Based on decades of experiences on research, development and handcraft for audio amplifiers by Dussun, every new design in R30 aimed at the clear objective for sound quality and tone improvement.In order for its output music signal by R30 possessing high fidelity against the music source, output characters matching electrodynamic loudspeakers’ electric-sound characters, The design of R30 went through a long time repeated audition, measure and improvement process,which made the finished R30 achieve the ideal matching level for signal magnification circuit, volume control circuit, power supply system and interior construction. In addition to the technical specification for a hi-end amplifier deserved,R30’s sound possessed outstanding quietness, rich details, dense timbre and transparent and spacious tone. It escorted the audience to rediscover the performing atmosphere and rich sound spacial information from those familiar CDs which missed before. R-30, made under the principle of uncompromising, became the first reference level integrated amplifier in Dussun product family by means of high performance and high sound quality.

●0.1dB step left and right channel fine synchronized high precise volume control

Considering the volume control device is one of the souls of an amplifier, R30 employed Dussun developed volume control device, which set up by a 16-bit digital controlled analogue circuit and possessed 1/65,535 level super fine resolution within whole volume control range. This volume control comprising circuit high linear solid state switch and precise resistance, ensured precise synchronization of R30’s left and right channel volume control at any position within its 80 dB volume control range. All problems of sound quality degradation and application intervention from frequency and phase distortion, volume synchronization error, sliding friction noise, limited lifetime attribute to traditional volume control potentiometers’ various voltage ratio, was eliminated by R30 volume control. Either working principle or practical performance, R30 reached the highest technical level fully among the state of the art hi-end amplifier volume control and pride upon taking part in “Club of 0.1 dB volume control”.

The newest designed “Optimized Self-Adaptive Bias Circuit” Improved significantly linear in output stage signal crossover region, while maintaining large power output without switch distortion. Much different from routine design which removed output stage feedback resulting in non-linear distortion large increase, especially at high frequency side, R30 accomplished super low crossover distortion by its “Optimized Self-Adaptive Bias Circuit”. Along with the most nature and spacious tone from a “non-feedback at output terminal amplifier”, R30 achieved the perfect result of full power output, low distortion, high sound quality in whole audio frequency.

R30 left and right channel circuit as well control units were equipped with individual independent power supply system. Data used to control individual channel was transmitted in term of optical. Absolute electric isolation made R30 is true to its name, dual mono channel amplifier, which working as same as two sets of precisely synchronized independent mono channel amplifiers, nil stereo crossover between left and right channel, resulting in pinpoint accurate sound images.

Individually pre-set gain level for all input terminals
Individually pre-set channel name for all input terminals
Display screen brightness adjustable on 4 levels
Maximum volume pre-set to protect expensive loudspeakers
Fade-in volume when switching on
Aluminium full function remote control unit

About “Hyper Class A”

“Hyper Class A” is a “Green” Class A solution, whose technically successful adaptive-bias circuit achieves the extra large class A power output objective under conditions of low-power consumption and low heat producing. The adaptive-bias circuit with an ideal specification permits the amplifier to maintain class A mode output even if the speakers’ impedance drops largely and output power increases several times. This situation is different from the traditional pure class A amplifiers’ inevitable situation of returning to class B when the speaker load impedance goes down, and is much close to the ideal class A amplifier essence.

Rated Output: 2×200W(8Ω) Class A, 2×360W(4Ω) Class A,
Frequency Response: 20Hz~20KHz ±0.5dB
Volume control range: 80.0 dB
Gain resolution: 0.1 dB steps above 31 in display (-50.0 dB)
Gain: 6, 12, or 18 dB in the line stage 26.8 dB on amplifier section
Input Impedance: 50KΩ
Output Impedance: ≤ 0.07Ω 20-20KHz
THD+Noise: ≤0.3%
Signal to Noise Ratio: ≥105dB A-weighted
Overall Dimensions: 440W×197H×500Dmm


€4,999.00

Add to Cart: