Your cart is empty

KHV-200

  • Model: Vincent | KHV-200
  • Shipping Weight: 3.6kg

Vincent KHV-200 | Hybrid Headphone Amplifier

The number of people who enjoy listening to music through headphones has increased steadily over the past few years. In many audio sources and amplifiers you can often find the option to connect headphones, but the sound usually falls short of what the headphones can do. To get the most out of your headphones, we at Vincent have developed a completely new headphone amplifier, the KHV-200. The lead in the development was, as was the case with the Vincent SV-237MK, SV-737 and SA-T7, engineer Frank Blöhbaum.

The technical parameters of headphones vary enormously. The impedance of high quality headphones ranges from 16 ohms to 600 ohms. With the same efficiency - equally loud reproduction with the same power input - low impedance means a greater current and a lower voltage requirement. In the case of headphones with a relatively large impedance of 300 or 600 ohms it is the other way round: the headphone amplifier must be used to control it harmoniously and deliver a comparatively high voltage and therefore a lower current. Mobile devices such as mobile phones and tablets, for example, only deliver low output voltages, which is why headphones with a higher impedance on such devices sound often too quiet.

The KHV-200 headphone amplifier was designed to work with almost all available headphones and control them with the highest sonic performance. Adjustments can be made using a gain switch. In addition to the usual 6.3 mm jack connection, the KHV-200 also has a 4-pin XLR connection. This means that even the highest quality headphones can be connected to the KHV-200.

Specifications:

Frequency range: 20 Hz - 20 kHz (± 0,1 dB)
Harmonic dirtortion: < 0,01% (1 kHz; 0,1 W; 32 Ohm)
Signal-Noise Ratio: > 95 dB
Input Impedance: 33 kOhm
Max. Input Voltage: 4 Veff
Nominal Amplification Headphone Out: Low Gain: -2,66 dB, High Gain: 13,64 dB
Nominal Amplification Preamp Out: Low Gain: -11,06 dB
High Gain: 5,13 dB
Nominal Amplification Record Out: 0 dB, Inputs: 2 x Stereo RCA
Outputs: 1 x Stereo RCA (PRE OUT), 1 x Stereo RCA (REC OUT), 1 x Headphone 6,3 mm Stereo jack, 1 x Headphene XLR 4-pin Stereo
Power Supply: 230 V/50 Hz und 115 V/50/60 Hz (switchable)
Dimensions (W x H x D): 210 x 85 x 277 mm
Weight: 3,6 kg
Colors: Black/Silver
Tubes: 2 x E180F/6SCH9P, 1 x ECC82

Always Free Shipping

€1,049.00

Please Choose:



Add to Cart: