Solid State Audio VPI turntable specialists

VPI Industries Inc. is a high-end audio manufacturer that was started by Sheila and Harry Weisfeld, the founders and co-owners thirty two years ago. Both Jonathan, our oldest son and VPI Industries began at the same time in 1978 with our first product, a record weight in two different sizes. Then, we introduced a turntable isolation base in December of 1978.

Our first major product, which is still in production in an improved form, was our HW-16 record cleaning machine introduced in 1981. Harry Weisfeld, then a dedicated audiophile, wanted his records to be as clean as possible (including the dirty ones whose sonic potential lay beneath a layer of contaminants). However, the only available record cleaning machine at that time was the Keith Monks Record Cleaner. How could a newly married husband justify this expense to his wife! (“Too bad some of those conversations were not recorded for posterity”, says one reviewer”; no doubt they would have had a familiar ring to many audiophiles and their designated others). Without much choice, Harry decided to make a record cleaning machine for his own use. This became the original HW-16, which sold for less than 1/5 the price of the Keith Monks Cleaning Machine. The 16 was noisy, but so was our corn popper.

Soon after the cleaning machine, the infamous DB-5 or "magic bricks" were introduced. These were wood-encased ferrous metal blocks designed to absorb stray electromagnetic radiation from electronic components.

This was followed by VPI manufacturing bases for both the Denon and JVC direct drive motors.

And then the HW-19 turntable followed by the MK2 and then MK3 and then the MK4. These tables have become an industry standard for High End performance at an affordable price.

With the introduction of the TNT Turntable came the reality of Harry’s promise to produce a state-of-the-art turntable at something less than a state-of-the-staggering price.

In 1985, the PLC, or "power line conditioner" was introduced. "A new product" and "a new child"; Mathew, our youngest son was born.

Then, in 1995, Harry and Sheila Weisfelds’, oldest son, Jonathan, then seventeen years old and a Junior in High School, was killed in a horrific car accident with two other boys. The tonearm that Harry and Jonathan had been working on became a reality (as a living memorial to the Weisfelds’ son). Jonathan had worked at his parents' factory and was helping his dad design a new tonearm. This tonearm became the "JMW Memorial Tonearm". A percentage of every tonearm that is sold is put into the "Jonathan Weisfeld Memorial Fund" with the funds being used to further Arts and Music.

The introduction of the Aries, later the Scout and then the Scoutmaster, and then finally the Super Scoutmaster brought our company into new areas of business and manufacturing while at the same time increased our sales. Most VPI turntables regardless of vintage are upgradeable. VPI manufactures a variety of turntables which range in price and available options, as well as the JMW tonearm series, the SDS and three record cleaning machines.

Our latest product was the 30th Anniversary “Classic” Turntable. It is the culmination of thirty years of work and the beginning of a new generation of turntables. Simple, mechanically correct, low in cost, and excellent at extracting the excitement locked in those vinyl grooves.
Sheila and Harry’s sonic philosophy is to reproduce the dynamics of live music in one’s home, and that the illusion of reality cannot be duplicated without convincing resolution of low-level detail, along with a natural sense of acoustic space. We use live concerts, reel-to-reel tapes, and a Yamaha Disclavier grand piano as sonic references. Mathew is the trombone and piano player in our family, Jonathan was the guitarist, playing both the acoustic and electric guitar. And Harry played the accordion in his youth.

All VPI products are built in the United States in Cliffwood, New Jersey using American made parts and labor. We are an old school American manufacturer sourcing American made components whenever possible, even if they are more expensive than foreign components. The tonearm lifters are the only part of the JMW tonearms that aren’t made by any American manufacturer and are thus purchased abroad.

The VPI products shown on our website are only a small selection of what's available, if you are interested in a VPI product other than those shown on our website: Mail Us

Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the JMW-10.5i SE.

The Scoutmaster is a Scout with a shot of testosterone for a complete musical experience. When teamed up with a good cartridge the Scoutmaster is as good as it gets in reproducing classical music.

The finishing touches are the specially designed, totally non resonant laminated chassis and the periphery ring clamp. The ring clamp lowers warp induced speed variations to near zero making the combination of HR-X flywheel drive and perfectly level record sound like a master tape.

THE ARIES 3 IS THE PERFECT CHOICE FOR THOSE WHO WANT NEAR-HR-X PERFORMANCE IN A SMALLER SIZE.

The 1.75"-thick platter is comprised of non-resonant acrylic and incorporates an inverted bearing similar to that used in the HR-X. The bearing shaft is 60 Rockwell hardness, ground and polished, and the platter rotates on a Teflon/Delrin composit thrust plate for ultra low noise.

The solid stainless steel motor assembly is almost 15 pounds and contains a smooth 300-RPM synchronous motor with Delrin motor pulley. This is a very low noise system with the fundamental resonance of the motor at 5 Hertz which is well below the frequency a cartridge can reproduce.

The JMW 12.7 tonearm is bolted to the aluminum portion of the chassis with a double base mounting, providing the ultimate in rigidity and adjustability. The SDS power supply rounds out the package and provides a pure AC signal to the drive system.

The HR-X, includes the JMW 12.7 tonearm with propietary VPI silver over copper wire, periphery ring clamp, center record weight, dual motor flywheel, air ball suspension, clear acrylic platter with inverted bearing, and SDS power supply.

When teamed up with the RIM DRIVE system the HR-X becomes one of a handful of turntables able to raise the hairs on the back of a listeners neck while enjoying the sculptured beauty of its design